Difference between revisions of "Abh mod/Joint Single 1x4"

From Cosmoteer Wiki
Jump to: navigation, search
(Created page with "The '''Joint Single 1x4''' was introduced in 0.7.2. It was unplanned and only added by request for convenience and to simplify the process of creating a joint which would othe...")
 
Line 1: Line 1:
 +
{{stub}}
 +
 
The '''Joint Single 1x4''' was introduced in 0.7.2. It was unplanned and only added by request for convenience and to simplify the process of creating a joint which would otherwise require a [[Abh mod/Hangar|Hangar]] anchor part, [[Abh mod/Ejection Tube 1x1|Ejection Tube 1x1]], [[Abh mod/Nozzle Guard|Nozzle Guard]] and [[Abh mod/Teleconnect Force|Teleconnect Force]].
 
The '''Joint Single 1x4''' was introduced in 0.7.2. It was unplanned and only added by request for convenience and to simplify the process of creating a joint which would otherwise require a [[Abh mod/Hangar|Hangar]] anchor part, [[Abh mod/Ejection Tube 1x1|Ejection Tube 1x1]], [[Abh mod/Nozzle Guard|Nozzle Guard]] and [[Abh mod/Teleconnect Force|Teleconnect Force]].
  

Revision as of 11:06, 26 July 2020


The Joint Single 1x4 was introduced in 0.7.2. It was unplanned and only added by request for convenience and to simplify the process of creating a joint which would otherwise require a Hangar anchor part, Ejection Tube 1x1, Nozzle Guard and Teleconnect Force.

Overview

This joint single 1x4 has a single bearing joint with enough space to encase it on both sides or build intricate curvatures.

Usage

Blueprint mode is essential for various reasons. The round bearing end is meant to be encased in order to be held. The base of the part is marked by the arrow.

There are options to give the base 1x1 section a roof, and options to give it visible structure or hangar floors up to the bearing.

Since the constructions are not direction connected on the grid the whole setup can only be saved in and as blueprint. Otherwise it is necessary to connect the moving sections and release them with Explosive Charge or Explosive Bolt or Ejection Tube 1x1 depending on the desired damage or not at all.

Building recommendations

  • Use Abh's aesthetic armor or hull parts to encase the bearing joint or the joint base.
  • You can build numerous variations of double or dual joints or even multi joints by placing the joints back to back or reversed facing or side to side or in any combination for more complex moveable parts.

See Also