Difference between revisions of "Abh mod/SIF Generator 1"

From Cosmoteer Wiki
Jump to: navigation, search
(Created page with "{{stub}} This 1x1 part was created with shield arc of 5.2 tile-unite radius and an arc of 86 degrees covering, and placed at 45 degrees covering the corner section. T...")
 
m
Line 1: Line 1:
 
{{stub}}
 
{{stub}}
  
This 1x1 [[part]] was created with shield arc of 5.2 [[tile]]-unite radius and an arc of 86 degrees covering, and placed at 45 degrees covering the corner section.
+
This 1x1 [[part]] was created with shield arc of 5.2 [[tile]]-unite radius and an arc of 86 degrees, and placed at 45 degrees covering the corner section.
 
The area covered by the shield is (((86/360)*5.2)/((90/360)*10))*2π = 0.4968_ smaller than the vanilla shield. Therefore, the energy drain should have been .4968*100=50. However, due to the shield's specific use as '''S'''tructural '''I'''ntegrity '''S'''hield (SIF) its use was aimed at stabilizing the hull. A such demand is far lower, and the power drain was set at 25. In return it fares bad against weapons fire where its ``AmmoDrainPerDamage`` remained the same as the vanilla shield at 1.2 or 2.4 times the vanilla shield. Spamming the part will not result in any advantages.
 
The area covered by the shield is (((86/360)*5.2)/((90/360)*10))*2π = 0.4968_ smaller than the vanilla shield. Therefore, the energy drain should have been .4968*100=50. However, due to the shield's specific use as '''S'''tructural '''I'''ntegrity '''S'''hield (SIF) its use was aimed at stabilizing the hull. A such demand is far lower, and the power drain was set at 25. In return it fares bad against weapons fire where its ``AmmoDrainPerDamage`` remained the same as the vanilla shield at 1.2 or 2.4 times the vanilla shield. Spamming the part will not result in any advantages.
  

Revision as of 06:49, 4 August 2017


This 1x1 part was created with shield arc of 5.2 tile-unite radius and an arc of 86 degrees, and placed at 45 degrees covering the corner section. The area covered by the shield is (((86/360)*5.2)/((90/360)*10))*2π = 0.4968_ smaller than the vanilla shield. Therefore, the energy drain should have been .4968*100=50. However, due to the shield's specific use as Structural Integrity Shield (SIF) its use was aimed at stabilizing the hull. A such demand is far lower, and the power drain was set at 25. In return it fares bad against weapons fire where its ``AmmoDrainPerDamage`` remained the same as the vanilla shield at 1.2 or 2.4 times the vanilla shield. Spamming the part will not result in any advantages.